Kitchen Sinks

SS-BL10 Workstation Sink Installation Resources

Use these resources for the SS-BL10 and SS-BR10 workstation sink family. This video remains on the reference channel until an official Cozy N Bath channel upload is available.

Prepare first

Before Installation

Pre-installation checklist

  • Confirm the cabinet, countertop cutout, and support structure match the exact sink model.
  • Shut off hot and cold water and disconnect power to any disposal before work.
  • Inventory the sink, faucet, controls, drain parts, hoses, and workstation accessories.
  • Dry-fit every connection and confirm the drain route before applying sealant.
  • Protect the sink finish and countertop while assembling components.

Tools you may need

  • Tape measure
  • Pencil
  • Drill and suitable bits
  • Phillips screwdriver
  • Adjustable wrench
  • Slip-joint pliers
  • Plumber's putty or approved sealant
  • 100% kitchen-and-bath silicone
  • Bucket and towels
  • Safety glasses and gloves
Safety note: Shut off water and disconnect disposal power before installation. Follow local plumbing and electrical codes. Use a licensed professional when modifying supply, drain, countertop, or electrical connections.

Documents

Manuals & Applicable Models

Download only the document that lists your complete model number.

Installation manual · English

Digital-Display Workstation Sink Installation Manual

Revision: Unverified

Applies to: SS-BL10-301808, SS-BR10-301808, SS-BL06-332212, SS-BR06-332212, SS-BR10-332212, SS-BL10-332212

Troubleshooting

Frequently Asked Questions

Does this guide apply to every SS-BL06 size?
The video focuses on SS-BL06-332212. Use the model list beside each manual and contact support if your sink dimensions or included controls differ.
Can I connect a garbage disposal?
Compatibility depends on the drain and control assembly. The knob-control drain note warns that its drain control must be removed when a disposal is installed.
Should the sink be installed before the countertop?
Installation order depends on the mount style and countertop material. Confirm the cutout and support requirements with the countertop fabricator.
How do I check for leaks?
With the cabinet dry, test hot and cold supply connections, faucet controls, drain joints, overflow or accessory lines, and the filled-bowl drain seal.
Who should make plumbing or electrical changes?
Use a licensed professional whenever local code requires it or when supply, drain, disposal, outlet, or countertop work is outside your experience.