Your Cart (0)
Your cart is empty
Tax included and shipping calculated at checkout
Installation note · English
SS-BL06 Drain Assembly Installation Note
Revision: Unverified
Applies to: SS-BR06-301808, SS-BL06-301808
Kitchen Sinks
SS-BL06 Waterfall Workstation Sink Installation Guide
This installation video focuses on SS-BL06-332212. Other SS-BL06 and SS-BR06 sizes may use different parts or connections, so verify the full SKU and manual applicability before installation.
Prepare first
Before Installation
Pre-installation checklist
- Confirm the cabinet, countertop cutout, and support structure match the exact sink model.
- Shut off hot and cold water and disconnect power to any disposal before work.
- Inventory the sink, faucet, controls, drain parts, hoses, and workstation accessories.
- Dry-fit every connection and confirm the drain route before applying sealant.
- Protect the sink finish and countertop while assembling components.
Tools you may need
- Tape measure
- Pencil
- Drill and suitable bits
- Phillips screwdriver
- Adjustable wrench
- Slip-joint pliers
- Plumber's putty or approved sealant
- 100% kitchen-and-bath silicone
- Bucket and towels
- Safety glasses and gloves
Safety note: Shut off water and disconnect disposal power before installation. Follow local plumbing and electrical codes. Use a licensed professional when modifying supply, drain, countertop, or electrical connections.
Video checkpoints
Key Installation Steps
Use these checkpoints with the complete video and exact model manual.
-
00:00
Review the installation
Confirm the SS-BL06-332212 sink, controls, accessories, hoses, and drain components.
-
00:28
Prepare the sink and work area
Protect the finish, verify the cutout and support, and shut off water and disposal power.
-
00:58
Install faucet and control components
Fit the waterfall faucet, controls, cup washer, and related hardware in the shown locations.
-
01:34
Connect supply and control lines
Route and tighten hot, cold, and control connections without kinking hoses.
-
02:12
Assemble the drain
Install the drain and seals, following the separate drain note when applicable.
-
02:52
Set and secure the sink
Apply approved sealant and fasten the sink using the correct support method.
-
03:32
Install workstation accessories
Place the included racks, boards, and accessories and confirm clearance.
-
04:08
Restore water and leak-test
Test every supply and drain joint, dry the cabinet, and recheck for slow leaks.
Documents
Manuals & Applicable Models
Download only the document that lists your complete model number.
Installation manual · English
Digital-Display Workstation Sink Installation Manual
Revision: Unverified
Applies to: SS-BL10-301808, SS-BR10-301808, SS-BL06-332212, SS-BR06-332212, SS-BR10-332212, SS-BL10-332212
Troubleshooting
Frequently Asked Questions
Does this guide apply to every SS-BL06 size?
The video focuses on SS-BL06-332212. Use the model list beside each manual and contact support if your sink dimensions or included controls differ.
Can I connect a garbage disposal?
Compatibility depends on the drain and control assembly. The knob-control drain note warns that its drain control must be removed when a disposal is installed.
Should the sink be installed before the countertop?
Installation order depends on the mount style and countertop material. Confirm the cutout and support requirements with the countertop fabricator.
How do I check for leaks?
With the cabinet dry, test hot and cold supply connections, faucet controls, drain joints, overflow or accessory lines, and the filled-bowl drain seal.
Who should make plumbing or electrical changes?
Use a licensed professional whenever local code requires it or when supply, drain, disposal, outlet, or countertop work is outside your experience.
Continue